-Engine cutout on hood
-Engine compartment difficult to assemble
-Tailights look fake

This was my second model and needless to say, it is dead. I got sick of looking at it, because it was soooo ugly. Blue Interior? I mean blue interior in a Corvette?

the dash board and radio dials werent too
detailed. the custom hood was a little hard to cut out, you just have to sand it a lot to get a good look

I totally customized the interior. I painted it dark green with black. I made the details on the door copper. Over all I extremely reccomend this car. Just take your time and this baby looks sweet.!!!!!

None I could find. Just with some help from this website....it made this car no problem...maybe just some newbie problems and that was all.

This was a great build, I wouldn't buy another one just to keep a variety in my household. But this was a great first model and for the skilled...they could do better and make this into a real beauty !

Front end seems to not want to fit under body with out some work. Engine output emblems are too small of detail. Exhaust is done poorly IMO.

I really liked doing this model even if i had to repaint it many times. I broke off the windsheild when i was sanding and have not gotten it back to the orginal spot.

I can see building other versions of this model as it went together so well

Engine bay is difficult fit - barely enough space for body to fit over inner fenders in engine bay.
Wheels are for stock version - so if you build the blown street version without the flame decals - it looks like a bit of a hybrid.
Entire front engine/chassis assembly must be just right - NO extra clearance. Pay careful attention to this or you will be rebuilding.

I liked this model as I spent over a year from start to finish. This kit can yield some excellent results. Good kit to customize - bigger wheels, flared wheel wells etc, would look great with street version - I didn't have the expertise to do the scratch building.

Wind shield frame needs little adjustment for the roofs to fit properly.

I really like this kit. Kit comes in 2 version's, stock and custom.I built the custom and plan on doing the stock.I put on the flame decals and they went on with no problem and look good.Nice kit.

-It can be a little hard to fit the body over the chassis and there is not a lot of room around the engine for the master cylinder / wiper canister.
-None of the chrome or clear parts were bagged so many parts had scratches.
-The windshield is also bent a bit which causes neither of the tops to line up properly this especially a problem with the hard top.

This was a great kit to build I built mine stock and I would build another custom. I would not recommend this kit to a beginner however as the engine cassis fit is a little tight which may cause the whole assembly to fall a part. Which could lead to the most of the kit having to be stripped and rebuilt if one is not careful. None the less a great build.

-windshield frame flimsy-I broke it twice !
-not many "stock" decals such as emblems
-windshield needs to be trimmed slightly to fit properly

Very nice model of an early C3, my favorite style of 'Vette. Everything fit decently,with a few problems as noted. Great kit, I would recommend this to all modellers !

The hood didn't fit around the blower very well, along with the pins that are used to open and close the hood. Ended up trimming the pins off and opening the hole for the blower more.

Body didn't want to sit on the chassis right. Took a while, but finally got it acceptable.

I would recommend this to someone who would want to just build it to have. Has great optional parts to suit your style. I really enjoyed it.

The only thing probably wrong with this kit IMO is the interior. It seemed like a tub.I wasn't impressed with the interior.That is about it that is bad about this kit.

This was possibly one of revells best kits. Parts fit great. Great engine replicas. The decals weren't the best mine ripped very easily.

-Both front inner fenders were left out on my model when I built this Corvette stock, because when assemble them to the body, everything is a more tighter fit. I left mine off, as interior/chassis to body was a better fit.
-A few mold lines on the body, but can be easily fixed.
-Interior tub looked simple, but had side panel inserts. Not that easy to paint either.
-Front end sat a little higher than the rear when fully assembled. Could've been my fault though.

Overall, a pretty good model to build. I built the stock version, and turned out looking excellent. Recommended for intermediate to skilled model builders.

The only major draw back would be instructions don't mention all included or optional pieces. Windshield supports straight out of the box need to straightened.

Great model for any corvette enthousiast, and a perfect starting point for any number of custom applications. I would reccomend to either a seasoned or novice builder qas this is an enjoyable kit.